EN
107
Care & Maintenance
Warning!
Before performing
any work on the tool, unplug
the power supply cord.
Clean the cutter bar after each use:
•
Remove contamination, remains of
blades etc.
•
Place the hedge trimmer on its side
and apply a thin film of oil to the
cutter bar. Preferably use environ-
mentally friendly lubricants, e.g.
service sprays.
Warning!
Wear protective
gloves when handling the
cutting bar!
Caution!
Do not oil the hedge
trimmer while it is running.
Clean the unit after every use. Failure
to clean the unit can damage the ma-
terials and cause malfunctions.
-
Remove dirt and dust from the tool
with a paint brush or dry cloth.
-
Place the protection hood on the
cutter bar.
-
Never spray the hedge trimmer
with water.
-
Keep the ventilation slots clean and
free of dust.
-
Keep the tool, in particular its plas-
tic components, away from brake
fluids, petrol, petroleum products,
penetrating oil, etc. These sub-
stances may lead to damage.
-
Do not store your hedge trimmer
near fertilisers and other garden
chemicals. Danger of corrosion.
-
Store the appliance in a dry and
frost-free place (10-25 °C).
-
Repairs may be carried out by an
authorised customer service centre
only.
Replacement Parts
Warning!
Replacement
parts must conform with
the requirements specified by the
manufacturer. Therefore use
original replacement parts only
or spare parts authorised by the
manufacturer.
In case of service requests or spare
parts, please contact your local
HORNBACH store or write an email
Summary of Contents for FQ-EHS 60055
Page 102: ...EN 102...
