FOR-A HVS-AUX16, Operation Manual

Page: 33 / 51

33
6. Operations
This section explains how to select output signal in the Auxiliary Unit. Depending on the SHIFT
mode, select operations differ as shown in the tables below. Refer to section 5. "Menu Operation"
for changing SHIFT mode.
If the HVS-AUX8:
SHFT mode Selectable Button Signal Selection
NOR
(Normal)
SHIFT not lit: 1-8
SHIFTlit:
9-16
Press signal select buttons.
NON
(Non-shifted)
1-8 Press signal select buttons.
TAKE 1-8
Press signal select buttons
and then press SHIFT.
If the HVS-AUX16:
SHFT mode Selectable Button Signal Selection
NOR
(Normal)
SHIFT not lit: 1-16, PGM1, PREV1, CLEAN1
SHIFTlit:
17-32, PGM2, PREV2, CLEAN2
Press signal select buttons.
NON
(Non-shifted)
1-16, PGM1, PREV1 and CLEAN1 Press signal select buttons.
TAKE 1-16, PGM1, PREV1 and CLEAN1
Press signal select buttons
and then press SHIFT.
If the HVS-AUX32:
SHFT mode Selectable Button Signal Selection
NOR
(Normal)
SHIFT not lit: 1-32, PGM1, PREV1, CLEAN1
SHIFT lit:
1-32, PGM2, PREV2, CLEAN2
Press signal select buttons.
NON
(Non-shifted)
1-32, PGM1, PREV1 and CLEAN1 Press signal select buttons.
TAKE 1-32, PGM1, PREV1 and CLEAN1
Press signal select buttons
and then press SHIFT.
6-1. NOR Mode
（
Default
）

Output signal is switched immediately after a signal selection button is pressed.

Top labels of the signal selection buttons are activated when SHIFT is not lit. (See tables
above).

Bottom labels of the signal selection buttons are activated when SHIFT is lit. (See tables
above).
6-2. NON Mode

Output signal is switched immediately after a signal selection button is pressed.

SHIFT is disabled and the button light never turn on.
Only top labels of the signal selection buttons are available.
You may change signal assignments for these buttons using free assign function. (See section
5-3. "Free Assign.")
USO
RESTRITO