FOR-A HVS-AUX16, Operation Manual

Page: 22 / 51

22
3-4. Remote Mount with HVS-AUX8RK
If the front panel and frame of the HVS-AUX8 units are separated using the optional HVS-
AUX8RK, connect between the D-sub connector (15-pin D-sub, male) on the rear side of the
front panel and the TO PANEL connector (15-pin D-sub, female) with the supplied control
cable.
Front Panel top view
15- pin D-sub, male
Supplied cable
15-pin D-sub, female
Frame rear view
S/No.00000 DC 12 V
CONTROL A

ON OFF
CONTROL B SE RVICE I/O ALA RM
3-5. Remote Mount with HVS-AUXRK
If the front panel and frame of the HVS-AUX16/32 units are separated using the optional
HVS-AUXRK, connect between the D-sub connector (15-pin D-sub, male) on the rear side of the
front panel and the TO PANEL connector (15-pin D-sub, female) with the supplied control cable.
Front Panel rear view
Frame rear view
CAUTION
Use the supplied control cable when configuring the optional HVS-AUXRK and do not
disconnect the cable (power supply included) from when the unit is in operation.
Otherwise, malfunction may result. Do not use other cables.
CAUTION
Use the supplied control cable when configuring the optional HVS-AUX8RK and do
not disconnect the cable (power supply included) from when the unit is in operation.
Otherwise, malfunction may result. Do not use other cables.
RATING LABEL
15-pin D-sub, male
Supplied cable
15-pin D-sub, female
POW ER AC100-240V ~50/60Hz IN
CONTROL A CONTROL B SERVICE I/O ALARM
ON

OFF
ON OFF
USO
RESTRITO