FOR-A FA-95AIO, Operation Manual

Page: 30 / 48

30
7-4. Parameters That Are Not Stored in Event Memories
The following parameters are not stored in event memories for FA-9500/FA-9520 (FA9500
mode).
DISABLE/ENABLE settings of CHANGEOVER in the VIDEO INPUT SET menu.
ON/OFF settings of FREEZE in the FREEZE SETmenu.
ON/OFF settings of MASTER MUTE in the MASTER OUT GAIN Setting (MASTER) menu.
All settings in the EVENT SETUP menu (7-3).
All settings in the Other Settings & Information (OTHER) menu.
All settings in the Various Signal Status Display (STATUS) menu.
Unit Name settings in the Event Control menu.
All settings under Network Settings.
All settings in the Establishing Connection with the FA-9500/FA-9520 menu (5).
All settings in the LOUDNESS MEASUREMENT menu.
ON/OFF settings of CONTROL in the LOUDNESS CONTROL ENABLE menu.
All settings in the WEB Browser Settings menu (8).
The following parameters are not stored in event memories for FA-9520 (FA9520 mode).
ON/OFF settings of FREEZE in the FREEZE SETmenu.
All settings in the EVENT SETUP menu (7-3).
All settings in the Other Settings & Information (OTHER) menu.
All settings in the Various Signal Status Display (STATUS) menu.
All settings under Network Settings.
All settings in the LOUDNESS MEASUREMENT menu.
ON/OFF settings of CONTROL in the LOUDNESS CONTROL ENABLE menu.
* Refer to the FA-9500/FA9520 Operation Manual for details on all above settomgs that are not
given section numbers in parentheses.
7-5. Note on Event Memory Operation
Do not power off the unit while saving an event. The event may not be properly stored.
The FA-95RU periodically checks and saves changes.
Wait at least 5 seconds after changing settings before turning the power off. We also
recommend saving important data.
See sections 8-7-1
“
Configuration Data Backup
”, and 8-7-2 “Event Data Backup
(FA-9500/FA9520)
” for details on how to save setting data.