20
<LIVE SAFE mode>
Menus that do not request a setting change confirmation (such as VIDEO PROC AMP) are
used the same as in NORMAL mode.
Menus that request a setting change confirmation (such as VIDEO INPUT SET) will be in the
setting change confirming state when the parameter is changed.
In the above example, pressing the IN SEL/DOWNMIX button while the button is in VIDEO
menu selection mode (lit green) will display the VIDEO INPUT SET menu. To change the IN
SEL setting, turn F1. Turn F2 for the LOSS setting, and F3 for the BACK COLOR setting. If
any setting is changed, single-arrow buttons and the control knob for the setting that has
changed will blink indicating the setting change confirming state. Pressing the single down
arrow button confirms the change and LEDs stop blinking, then light. Pressing the single up
arrow button cancels the change, the setting returns to before the change, and LEDs stop
blinking, then light.
While the FA-9520 is in a setting change confirming state, all buttons except single-arrow
buttons, control knobs F1 to F4 and their Unity buttons are disabled. To go to other menus,
press either single-arrow button to complete the confirmation.
4-2-5. Resetting to Default
<NORMAL mode>
The UNITY indicator light goes off when the setting value is changed from the default value.
Pressing the UNITY button while the light is off returns the corresponding setting value to the
default value. Then the light goes off. Pressing the button again returns the value to the
previous value before resetting to the default value.
<LIVE SAFE mode>
The UNITY indicator light goes off when the setting value has changed from default. Pressing
the UNITY button while the light is off returns the corresponding setting value to default, and
single-arrow buttons and the LED around the control knob above the UNITY button blink in
the setting change confirming state. Pressing the single down arrow button will resets the
value to default, and the UNITY indicator light turns on. Pressing the single up arrow button
cancels the reset, the setting returns to the value before it was reset, and the UNITY indicator
light goes off.
F1
F2
F3
F4
UNITY
UNITY
UNITY
UNITY
Press the UNITY button to
reset the value. The indicator
lights up orange.
