16
4. Front Panel Operations
4-1. Powering ON
Turn the power ON after all system connections are complete. The indicators on the front panel
light up during startup. When startup is complete, the indicators will go off. The UNIT ID SEL
menu will appear if no FA-9500/FA-9520 is connected.
U N I T I D S E L
8 0 1
M U I D : 1
I P : 1 9 2 . 1 6 8 . 0 . 1
N A M E : F A - 9 5 0 0 / F A - 9 5 2 0
F 3 : S E T F 4 : C A N C E L
IMPORTANT
Operation by the FA-95RU is ineffective, except for the ability to change its own
settings, unless it is connected to an FA-9500/FA-9520. To enable operation by the
FA-95RU, select and connect an FA-9500/FA-9520 to be controlled. See section 5.
“Establishing Connection with the FA-9500/FA-9520” for details on connecting
FA-9500/FA-9520 units.
4-2. Basic Operations
This section explains how to select menus and parameters.
Most of the menus can be controlled by these basic operations. However, some menus work
differently. See the descriptions given for each menu for details.
The FA-95RU has two menu operation modes: NORMAL mode, in which setting changes
immediately take effect, and LIVE SAFE mode, in which some settings request confirmation
before changes take effect. NORMAL and LIVE SAFE modes can be selected in the FRONT
OPERATION menu (sec. 6-2-1). Factory default is NORMAL mode. Menus that request setting
confirmation are shown in the menu list in
“Menu Buttons” in the FA-9500/FA-9520 Operation
Manual with a black circle (
●).
IMPORTANT
Make sure that the LOCK indicator on the front panel is turned off before starting an
operation with the connected FA-9500 or FA-9520 in FA-9500 mode. If the LOCK
indicator is lit, all operations on the front panel except the LOCK button are disabled.
Press and hold the LOCK button to enable operation.
See section 4-2-7.
“Operation Lock Function (FA-9520)” for the lock function in the
FA-9520 in FA-9520 mode that is different from the above.
The description in Basic Operation starts based on an established connection. To
establish a connection with the FA-9500/FA-9520, see section 5.
Connection with the FA-9500/FA-9520
”.
DISPLAY AREA
POWER
ON
OFF
LOCK
MU
SELECT
EVENT
BY-PASS
VIDEO IN
AUDIO IN FAN ALARM
GENLOCK
REMOTE
F 1
F 2
F 3
F 4
R E M O T E C O N T R O L U N I T
F A - 9 5 R U
F1
F2
F3
F4
UNITY
UNITY
UNITY
UNITY
PROCESS
SDI AUDIO
C C
AES AUDIO
CONV1
ANALOG
CONV2
MASTER
AVO
MAPPING
CLIP
DELAY
DOWNMIX
IN SEL
OUT SEL
MODE
AUDIO OP
VIDEO OP
VIDEO SYS
AUDIO SYS
STATUS
OTHER
VIDEO
AUDIO
LOCK button
