Foppapedretti RE-KLINO FIX, Instructions Manual

Page: 30 / 108

RE-KLINO FIX 30
• ENGLISH • • ENGLISH •
Seat fabric
1. Unhook the 6 clips from the frame (8-C).
2. Take the fabric off (8-D).
8.2 Replacing the cover
Headrest: Follow the steps in section “8.1 R: Follow the steps in section “8.1 Removing
the cover” in reverse.
ATTENTION: DO NOT use the child car seat without the fabric correctly installed.
WARNING! Never use the car seat if the buckle is not installed correctly. Make sure that
the metal “rings” tab is firmly attached to the frame of the car seat.
IMPORTANT: Ensure that the harness belt is not twisted and that it is correctly slotted into
the slots in the fabric and correctly hooked onto the frame.
9. WASHING
Cover
Do not use the car seat without the cover.
The cover can be machine washed with mild detergent using the delicate fabric cycle
(30°C).
The colours may fade if washed at temperatures higher than those indicated. Do not spin
dry or dry clean in a dryer (the fabric could become detached from the padding).
If you need to replace the lining, only use the lining supplied by the manufacturer. The
lining has a direct impact on retaining device function.
Plastic and metal parts
The plastic parts may be washed with water and soap. Do not use harsh detergents (such
as solvents).
The harness may be removed and washed with soap and warm water.
Warning! Never remove the tabs of the buckles from the straps.
St
1. When not in use, store the product in a safe place.
2. Do not place heavy objects on top of the car seat.
3. Store the car seat in a dry place.
4. Do not leave the car seat near direct sources of heat such as electric heaters.
10. CHECKLIST
For safety reasons, carefully read the following checklist before driving off.
• Make sure that the harness straps are positioned correctly around the baby and that the
straps are adjusted to the right height
• Make sure that the car seat straps are snug around the baby, but are not squeezing him
too tightly.
• Make sure that the straps are properly adjusted.