8
Stationary and Adjustable Mounting Bracket (SMB/APB)
Mounting of 18" Adjustable Mounting Bracket shown.
See suggested price list for angle sizes and lengths avail-
able. The full length of the horizontal flange of the out-
board mounting angles must be at the
same elevation
as the truck frame. The vertical leg of the angle must fit
flush
with the truck frame. See Figure A on page 5.
Mounting Angle
(Do not weld to
truck frame).
Mounting Angle
(Do not weld to
truck frame).
Truck frame
37" (939.1mm)
2"
2"
Bolt Spacing – Maximum 8" (203.0mm),
Minimum 4" (101.5mm)
Fontaine
®
Fifth Wheel Handbook
All mounting hardware must
be a minimum of: 5/8"
(16.0mm) Grade 8 bolts,
Grade C locknuts with
hardened steel washers,
tightened to 90-122 ft. lbs
