Truck frame
Fontaine
®
Fifth Wheel Handbook
7
Air and Manual Slide Bracket (ASB/MSB)
(Air Slide shown)
Adjustment of 24" mounting slide shown. Assemblies
with greater adjustment require longer angle and addi-
tional mounting bolts. See suggested price list for angle
sizes and lengths available. The full length of the horizon-
tal flange of the outboard mounting angles must be at the
same elevation
as the truck frame. The vertical leg of
the angle must fit
flush
with the truck frame.
See Figure A on page 5.
Mounting Angle
(Do not weld to
truck frame).
All mounting hardware must
be a minimum of: 5/8"
(16.0mm) Grade 8 bolts,
Grade C locknuts with
hardened steel washers,
tightened to 90-122 ft. lbs
55" (1395.9mm)
2"
2"
Bolt Spacing – Maximum 8" (203.0mm), Minimum 4"(101.5mm)
