Fonexion ideus ITCOMBO100, User Manual

Page: 35 / 109

USER GUIDE
EN
35
ITCOMBO100
DIAL MODE
The user can select to change the mode in which the base will dial.
Using
▲
/CID or
▼
/OUT key to select DIAL MODE item.
Press MENU key to enter.
Press
▲
/CID or
▼
/OUT key to select the TONE or PULSE dialing mode.
Press MENU key to confirm your selection.
Note: According to your telephone lines or PABX systems you may need to change the dialing
mode between Tone and Pulse.
FLASH TIME
The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet your telephone
line or PABX requirement.
Using
▲
/CID or
▼
/OUT key to select FLASH TIME
Press MENU key to enter.
Press
▲
/CID or
▼
/OUT key to select the 100ms, 300ms, 600ms and 1000ms.
Press MENU key to confirm your selection.
KEY TONE
The user is able to turn on/off the key tone on the keypad in standby mode.
Using
▲
/CID or
▼
/OUT key to select KEY TONE
Press MENU key to confirm.
Press
▲
/CID or
▼
/OUT key to select the ON or OFF to enable or disable the beep sound.
Press MENU key to confirm your selection.
LANGUAGE
The base will support up to 8 pre-defined languages.
Using
▲
/CID or
▼
/OUT key to select LANGUAGE item.
Press MENU key to enter.
Press
▲
/CID or
▼
/OUT key to select your desired language.
Press MENU key to confirm your selection.
DATE & TIME
The user is able to set the date and time on the base by selecting the following option.
Using
▲
/CID or
▼
/OUT key to select DATE & TIME, press MENU key to enter. The last
two digits of the year flashes.
Press
▲
/CID or
▼
/OUT key to edit the flashing value, then press MENU key to confirm.
Using the same method for month, date and time setting.
Press MENU key to confirm and return to the DATE & TIME menu.
Notes:
The date and time will be automatically set when the caller ID message is received in FSK.
When the unit is powered on initially, the date and time will be blinking, please to set the date
and time first according to use above methods.
MODIFY PIN
Some functions (including handset delete and base default) require a PIN code. The default PIN
is 0000, but you are able to change to your personal 4-digit PIN.
Using
▲
/CID or
▼
/OUT key to select MODIFY PIN item.