17
1.7.
"Day temperature" and "night temperature" setting
When one or more ambient probes are connected to boiler board, two levels of desired ambient temperatures can be set. Boiler will manage the
heating request based on the set temperatures, as follows. If no ambient probe is connected to the boiler, temperatures cannot be set.
"Day" temperature is identified by the symbol , while "night" temperature by the symbol .
The "day temperature" is active when bars are on, while
"night" temperature is active when bars are off.
1- Press “set” twice to access
the "day temperature"
setting mode.
2- Press “CH + / - " buttons
to edit "day temperature"
values. Press "ok" to confirm
the edited values and enter
the "night temperature"
setting mode.
3- Press “CH + / - " buttons
to edit "night temperature"
values.
4- Press "ok" to confirm the
edited values and enter the
"day temperature" setting
mode
.
Bars "off"
Bars "on"
Summary of Contents for ITACA KC 12
Page 71: ...71...
