15
1.5.
Adjusting heating and DHW temperature
Press the “DHW +/- ” button (d, fig. 1)
to select the domestic hot water set-point. During selection, icon DHW (6, fig. 1) will flash. As soon as button
is released, icon DHW (6, fig. 1) will continue flashing for approx. 3 seconds, and set-point value will flash as well. After this time, value is stored and
display standard operation will be restored. In the phase in which the icon is flashing, only the buttons to adjust the set-point temperature of the
DHW are enabled.
Press the “CH +/- ” button (e, fig. 1) to select the flow water set-point. During selection, icon CH (5, fig. 1) will flash. As soon as button is released,
icon will continue flashing for approx. 3 seconds, and set-point value will flash as well. After this time, value is stored and display standard operation
will be restored. In the phase in which the icon is flashing, only the buttons to adjust the set-point temperature of the CH are enabled.
1. DHW TeMPeRATuRe SeLeCTIoN
2. CH TeMPeRATuRe SeLeCTIoN
Summary of Contents for ITACA KC 12
Page 71: ...71...
