EN - 27
3.
Using a pencil, mark the position of holes T1 and T2:
4.
Marked points T1 and T2 correspond to the position of the holes for the lower screws. Place the bracket so that the
lower slots of the bracket match the marks T1 and T2 :
5.
Using a spirit level, check that the bracket is straight and mark the position of the two upper holes U1 and U2 .
6.
Depending on the type of wall, select suitable screws and dowels, the screws and dowels supplied may not be
suitable for the type of wall of your home. Drill as indicated by the holes marked and then insert the blocks in the wall.
a
a
a
U1
U2
U2
B
B
C
C