FONA CDRelite System User Guide
B1057003 Rev. 3
5
2. Hardware
2.1. Connecting Cables to the FONA CDRelite USB Interface
Module
IMPORTANT!
Do not connect the FONA CDRelite USB Interface Module and cable to
your computer until after you have successfully run the setup program. Procedures for
installing these files are supplied in Section 3, "Software."
The USB cable used with the device has a Series
"A" USB plug on one side and a Series "B" USB
plug on the other. The "A-type" plug connects to
any available USB port on the computer. The "B-
type" plug connects to the FONA CDRelite
Interface Module. cable part numbers and lengths are listed below:
B2250150 - 5 meters (16.5 feet)
B2250151 - 2 meters (6.5 feet)
B2250152 - 0.5 meter (1.6 feet)
IMPORTANT!
For normal operation of your FONA CDRelite system and to ensure
compliance with regulatory EMC and EMI standards, use only the USB cables described
and specified for your system.
The FONA CDRelite Sensor and FONA CDRelite USB Interface
Module are shown in Figure 1. Cable connections are described in
Table 1.
Figure 1. FONA CDRelite USB Interface Module Cable Connections
Table 1. Description of FONA CDRelite USB Interface Module Cable Connections
Number
Description
1
FONA CDRelite Sensor
2
FONA CDRelite Sensor cable connection
3
FONA CDRelite Interface Module
4
USB cable connection ("B" connector end of USB cable connects here)
5
USB cable connection ("A" connector end of USB cable connects to PC)
1
2
4
5
3
