Follett HCC700A, Operation And Service Manual

Page: 23 / 44

23
Fig. 27
6. Install main housing:
§
Slide main housing onto auger shaft (Fig. 27.1) .
§
Install main housing insulation (Fig. 27.2) .
§
Use an allen wrench to install 3/16" allen screws (3)
(Fig. 27.3) .
3
2
1
3
3
Fig. 28
7. Apply a coat of petrol-gel to the auger shaft.
8. Install gear motor:
§
Install main housing insulation (Fig. 28.1) .
§
Slide gear motor onto the auger shaft (Fig. 28.2) .
§
Install two 1/2" bolts (Fig. 28.3) .
3
3
1
2
Fig. 29
9. Use screwdriver to orient auger shaft to align with
motor shaft keyway
(Fig. 29.1) .
10. Install key into keyway (Fig. 29.2) .
1
2
Fig. 30
11. Install spacer, ensure that key is captured in slot
(Fig. 30.1)
1