Follett HCC700A, Operation And Service Manual

Page: 22 / 44

22
Fig. 24
6. Install the reservoir insulation, tube clamp, and
solenoid lever with three screws.
7. Install solenoid.
Fig. 25
1. Remove and inspect O ring seal. Replace if
damaged in any way
(Fig. 25.1) .
2. Clean O ring groove. Lubricate O ring with petrol-gel
and reinstall
(Fig. 25.2) .
1
2
Fig. 26
3. Use cardboard disc to press new mating ring into
main housing
(Fig. 26.1) .
4. Lube the shaft with liquid soap in the area shown
(Fig. 26.2) and slip on seal and spring (Fig. 26.3) .
Note: Do not touch the sealing surfaces with bare
hands. Contact with bare skin will cause
premature seal failure.
5. Install auger (Fig. 26.4) .
Cardboard
disc
Do NOT
touch!
1
3
4
2