Dispenser and Ice machine E7CI100A/E7FS100A
9
Installation
(continued)
–––––––––––––––––––––––––––––––––––––––––––––––
3.
Remove four plastic, thread-protecting plugs from bottom of
dispenser.
4.
Attach dispenser to base stand with supplied hardware
(Fig. 5)
.
NOTICE!
If installing optional Drip Tray Drain Kit, refer to instructions
included with the Drip Tray Drain Kit.
Fig. 5
5.
Connect water line. Recommended routing
(Fig. 6)
allows easy
access to water for cleaning and sanitizing procedure.
6.
If installing the optional internal water fi lter*, please see
Optional Internal Water Filter Installation on page 10
before proceeding. If not, proceed to step 7.
* If your dispenser has the internal water fi lter option, the water fi lter
must
be installed for the dispenser to operate. Because internal components will
need to be accessed for both procedures, Follett recommends installing the
water fi lter just prior to initial sanitizing.
7.
Connect power supply.
8.
Sanitize the dispenser prior to use (see
Cleaning and
Sanitizing on page 13
).
Fig. 6
X4
91.4 cm (3')
1/4" MPT
Plug
Valve
Summary of Contents for E7CI100A
Page 26: ...26 Dispenser and Ice machine E7CI100A E7FS100A Service continued Condenser Fan Motor Removal...
Page 30: ...30 Dispenser and Ice machine E7CI100A E7FS100A Parts Exterior 6 4 7 5 2 1 3...
Page 34: ...34 Dispenser and Ice machine E7CI100A E7FS100A Parts continued Bin Assembly 6 5 9 3 4 2 1 7 8...
Page 38: ...38 Dispenser and Ice machine E7CI100A E7FS100A Parts continued Base Stand 1 2...
