background image

  

Dispenser and Ice machine E7CI100A/E7FS100A 

3

Welcome ––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability, and 
outstanding after-the-sale support. To ensure that this product delivers that same degree of service, we ask that 
you take a moment to review this manual before beginning the installation. Should you have any questions or 
require technical help at any point, please call our technical service group at (877) 612-5086 or +1 (610) 252-
7301.

Before You  Begin –––––––––––––––––––––––––––––––––––––––––––––––––

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If 
damage is found, immediately notify the shipper and contact Follett Corporation so that we can help in the fi ling 
of a claim, if necessary. If needed, the serial number of your dispenser can be found by removing the drip tray 

 and locating the serial number label 

. A QR Code is located on the right hand side of the drip tray 

. This 

code allows you to access manuals, technical bulletins, and on-line training related to the 7 Series dispensers.

2

1

Scan to access technical 
documentation or visit

 

www.follettice.com/7seriesdocs

00981100R00

3

Check your paperwork to verify that you received the correct dispenser. Follett confi guration numbers are 
designed to provide information about the type of dispenser you are receiving. The following is an explanation of 
the different model numbers. 

E7

CI

100

A

Model

Confi guration

Ice Machine Capacity

Condenser

E7 Series

CI 

Countertop

FS Freestanding

100 

lbs per day

Air-cooled

Summary of Contents for E7CI100A









































Reviews: