24
Dispenser and Ice Machine 230 V/50 Hz, Rear Drain
Service
(continued)
User Interface Display Identification
Operation Display
Condition
Procedure
Normal
operation
—
Cleaning Mode Press and release maintenance/clean switch to
clean the user interface without dispensing ice
(see
Maintenance/Cleaning Mode on page
9
).
Drip tray full
Empty drip tray .
Six-month
periodic
maintenance
required
Follow Maintenance Mode procedure (below) and
also see
NSF-approved Cleaning and Sanitizing
Procedure on page 10
.
Maintenance
Mode
Enter Maintenance Mode by pressing
maintenance/clean switch until
displays .
Complete the cleaning and sanitizing procedure
shown on
page 10
. Exit Maintenance Mode by
pressing and holding maintenance/clean switch
until
no longer displays .
Service -
8000 hr
bushing check
Call Follett Technical Service Group at (877) 612-
5086 or +1 (610) 252-7301 . The flashing wrench
indicates that the 8000 hr bushing check is
required .
High amps
Contact Follett technical service group at (877)
612-5086 or
+1 (610) 252-7301 .
Note: For dispensers after serial number
D45191, the phone and wrench will
not
be
illuminated .
Internal leak in
dispenser
Locate leak and repair - Press reset on control
board . Contact Follett if icemaker is leaking .
Sleep mode
Press either dispense button to return to normal
operation .
