Dispenser and Ice Machine 230 V/50 Hz, Rear Drain 17
Service
(continued)
7 . Install compression nozzle:
§
Remove and inspect compression nozzle O-ring seal .
Replace if damaged in any way .
§
Clean O-ring groove . Lubricate O-ring with Petro-gel and
reinstall .
§
Install compression nozzle
(Fig . 19 .1) .
§
Install compression nozzle retainer
(Fig . 19 .2) .
§
Install M6 socket head allen screw
(Fig . 19 .3) .
Fig . 19
2
1
3
8 . Install transport tube (Fig . 20 .1) .
9 . Tighten hose clamp (Fig . 20 .2) .
Fig . 20
1
2
10 . Install gear motor:
§
Install main housing insulation
(Fig . 21 .1) .
§
Slide gear motor onto auger shaft
(Fig . 21 .2) .
§
Install two M6x90 allen screws
(Fig . 21 .3) .
Fig . 21
3
3
2
1
