FT-5 User Manual Page 47
29.
It may help to remove the Idler Top bracket so
that the GT2 belt can loop around the idler
pulley.
30.
Loop the belt around the Y stepper motor
pulley.
31.
Loop the end of the belt through the other end
of the Y-Belt. Pull the belt tight and use a zip tie
to secure it in place. Trim any excess belt.
32.
Loosen the two screws on the stepper motor
and pull so that the belt tightens. Tighten the
two screws when the belt is tight.
33.
Repeat steps 28-32 for the other Y Belt.
