FT-5 User Manual Page 3
INTRODUCTION
Congratulations! If you are looking over this manual it means that you are the proud owner of a Folger Tech FT-5 3D Printer, which is
a powerful tool that can help you unleash your creative spirit.
Our goal as a company is to provide affordable 3D printers to consumers worldwide. On top of this we want everyone’s first printing
experience to be a great one. So this User Manual was assembled to provide guidance in assembling and understanding common
procedures while using our 3D printer. It covers everything from assembly to the maintenance required to keep your printer
performing like new.
We look forward to helping you succeed in the exciting world of 3D printing and giving you everything you need to unlock your
innovation.
NOTE: Do not soak the melamine parts in water or cleaning products. You may wipe them down with a damp rag but do
not soak them. It will cause the parts to swell and/or break.
CONTACT FOLGER TECH
We understand that manual only covers the basics of your Folger Tech printer, so if at any time you need more assistance, visit our
support page at
Folger Tech Support
to send us a message or give us a call at (888) 397 – 8160
and we will be happy to address your
question or concern.
DISCLAIMER OF LIABILITY: FOLGER TECHNOLOGIES LLC specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of
any of the information or product. FOLGER TECHNOLOGIES LLC assumes or undertakes NO LIABILITY for any loss or damage suffered
as a result of the use, misuse or reliance on the information and or product. USE AT YOUR OWN RISK: Never leave your printer
unattended. This kit involves working with 110v/220v and should only be done if you are qualified, if you are not, speak to a
qualified electrician.
