Foley United ACCU-Pro 670, Assembly And Service Manual

Page: 9 / 50

9
FOR 220 V 50 or 60Hz applications Product No.
6700951 should be ordered.
6700951 includes a 2 KVA 220 Volt Step Down
to 110 volt 50/60 Hz transformer which is
prewired.
The wiring diagram is shown in FIG. 8.
The power cord has no connector. A connector
which is appropriate for your locality and 220 volt,
8 amp application should be installed.
ASSEMBLY INSTRUCTIONS (Continued)
FIG. 8
IMPORTANT GROUNDING INSTRUCTIONS
In case of a malfunction of breakdown, grounding reduces the risk of electrical shock by providing a path
of least resistance for electrical current.
This Grinder has an electrical cord with an equipment grounding conductor and a grounding plug. The
plug must be plugged into a matching outlet that is properly installed and grounded according to all local
or other appropriate electrical codes and ordinances.
Before plugging in the Grinder, make sure it will be connected to a supply circuit protected by a properly-
sized circuit breaker or fuse.
Never modify the plug provided with the machine--if it won't fit the outlet, have a proper outlet and circuit
installed by a qualified electrician.
ALWAYS PROVIDE A PROPER ELECTRICAL GROUND FOR
YOUR MACHINE. AN IMPROPER CONNECTION CAN CAUSE A
DANGEROUS ELECTRICAL SHOCK. IF YOU ARE UNSURE OF
THE PROPER ELECTRICAL GROUNDING PROCEDURE,
CONTACT A QUALIFIED ELECTRICIAN.
Use only a qualified electrician to
complete the installation.