MANUFACTURER DATA
WLP S.r.l.
Via Broletti, 18
38050 Castelnuovo (Trento)
www.wlpdust.com
Exclusive US Partner:
Fogco Environmental Solutions
600 S 56
th
Street, Unit 9
Chandler, AZ 85226
www.fogco.com
IDENTIFICATION DATA AND MACHINE PLATES
Each Machine is identified by a metal plate that provides the following information:
Machine Product Range
Machine Model Number
Year of Manufacture
Serial Number
Power Requirements
Horsepower
Amp Load
INFORMATION ON TECHNICAL ASSISTANCE
The Machines are covered by warranty as required by general conditions of sale. If the Machine should stop
working smoothly or parts become faulty according to the cases indicated by the warranty, the Manufacturer,
after having made appropriate verifications on the Machine, will repair or replace the faulty parts.
Work performed by the user to alter the machine, without explicit written authorization of the manufacturer,
shall void the warranty and the manufacturer shall not be held liable for damage caused by the faulty
product.
ARRANGEMENTS TO BE PROVIDED BY CUSTOMER
The following are the sole responsibility of the end user:
Arrangement of the site, including any structural work and/or channelling required;
Electrical power of the Machine, according to the laws in force in the country of use;
Grounding of the electrical power when a generator is being used;
Hydraulic power of the Machine, according to the laws in force in the country of use;
Any Pneumatic Power with compressed air.
Pre-filtration for non-potable water use
TRANSPORT AND HANDLING
Before carrying out any operation, it is mandatory to read the entire Instruction Manual.
The transport and the handling of the Machine must be performed in one of the following ways:
HANDLING WITH FORK LIFT: suitable for both TRAILER and POLE versions with base.
A fork lift with lifting force of at least 2200 lbs. and with minimum fork length of 55 inches must be used.
Insert the forks in the proper roll over protective spaces.
