TECHNICAL DATA
Description
HD 160
HD 230
HD300
Volts
Fan Motor HP
7.5
15
25
480 VAC / 60 Hz
Pump Motor HP
3
5
5
480 VAC / 60 Hz
Oscillation Motor HP
.1
.1
.1
24 VDC
Full Load Amps
21
32
45
STANDARD SUPPLY
The machine is supplied ready for use and includes the User’s Manual and Data plate with Machine
technical information;
GENERAL SAFETY WARNINGS
The manufacturer has done his utmost in designing this Machine to be INTRINSICALLY SAFE and is fitted
with all necessary protective and safety devices and is supplied with the information for its proper use.
The user can appropriately integrate the information provided by the manufacturer with supplementary work
instructions to ensure safe use of the Machine and must not be in contrast with the instructions given in this
Manual,
It is forbidden to operate the Machine in Auto mode with the fixed/mobile protection devices dismantled;
It is forbidden to inhibit the safety devices installed on the Machine;
It is forbidden to stand in front of the Machine when it is in operation;
Before carrying out any repair or maintenance, the Machine must be switched off and disconnected from
the water and power supply networks;
All maintenance operations must be performed by qualified and authorized staff;
It is mandatory to wear the necessary personal protection devices;
It is mandatory to respect and observe all alarms and warnings;
In the event of a malfunction of a component, the failed component must be replaced with and exact
duplicate. The manufacturer shall not be held liable for the consequences when generic parts are used
to replace factory authorized parts. Modification requests must be directed to the manufacturer;
Clean the machine, panels and controls with soft dry cloth or slightly soaked in a neutral detergent
solution. Do not use any type of solvent, such as alcohol or petrol, as the surfaces could be damaged;
The washing operations must be performed with the electrical and pneumatic separation devices cut off;
it’s strictly forbidden to use high pressure systems for washing the machine and/or its inner parts.
It is absolutely forbidden to move the machine when operating with lifting means
of any nature and kind. The machine can be moved exclusively with hydraulic
and electrical devices uncoupled and the frame must be blocked with the
appropriate pins to the lift forks. The spring pins must be inserted into the
blocking pins.
USE POTABLE WATER ONLY
Before putting the Machine into operation carefully read the instructions set out in this
Manual and follow the indications provided in it.
