Foerster CIRCOGRAPH DS, Operating Instructions Manual

Page: 53 / 67

MAINTENANCE 5.1 Maintenance schedule
6.452
45
5 MAINTENANCE
5.1 Maintenance schedule
WARNING !
Risk of injury!
Always switch off the drive and wait for the machine to stop before per-
forming work of any kind!
Do not touch or tamper with the sensor system, with the rotating unit
operating!
Deceleration times:
without braking approx. 6 minutes
with braking approx. 30 seconds
(Values are valid for maximum rotational speed 6,000 rpm)
Important!
Parts which are worn or damaged must be replaced immediately.
when changing
dimensions each shift each week each month
Roller guide clean, check track roll-
ers for
wear and damage oil joints, oil spindle, oil
hinges
Nozzles Remove, check thor-
oughly
and visually for damage clean,
clean for wear and
damage
Rotating parts clean clean,
check for wear and
damage
Testing heads clean,
check for wear and
damage clean,
check for wear and
damage
V-ribbed belt check tension
check for wear and
damage
Tab. 5.1 Maintenance schedule