4.3 Adjusting nominal diameter
OPERATION
30
6.452
4.3 Adjusting nominal diameter
4.3.1 Preparation
Select protective nozzles according to Chapter 4.2.
Switch off drive and wait for standstill.
Move test material out of the sensor system.
Move sensor system out of the testing section.
Opening the roller guides
Turn the locking bolt in ccw direction up to the stop.
Swivel out the roller guide.
WARNING
!
For safety reasons,
a safety switch
interrupts the power supply
of the drive as soon as the door of the drive cover is opened.
Do not
change
the function of the safety switch under any
circumstances!
Fig. 4.1 Entry side with housing flange
Safety switch
under the
joint
Housing flange
Locking bolt
Summary of Contents for CIRCOGRAPH DS
