13
Switching between Pre-amp and Routing Sections
The Routing and Pre-amp sections occupy the same space within the Saffire MixControl software interface. Click on this box to
switch between each view to access the respective controls
Pre-amp Section
This section is divided into two parts, the left hand side for the 2 Liquid Pre-amps and the right hand side for Pre-amps 3-8.
The Liquid Pre-amps feature high quality Focusrite Analogue microphone pre-amps. After analogue to digital conversion, the audio
signal is routed through the Liquid Pre-amps DSP. The analogue circuit in the pre-amp will switch to match the impedance settings
of the original pre-amp emulation.
Gain, phantom power and high pass filter controls are available from the front panel of the Liquid Saffire 56 and all additional
controls are available in the Saffire MixControl software.
The Liquid Pre-amp section provides control over the following parameters:
Pre-amp Emulation Select
•
Phase Select
•
Harmonics Knob
•
Pre-amps 3 to 8 Input Signal Source Select
•
These are described on the next page.
