Focusrite Liquid Saffire 56 User Manual Download Page 28

Page: 28 / 30

Performance Specifications

Microphone Inputs 1-2

Frequency Response: 20Hz - 20kHz +/- 0.1 dB

•

Gain Range: +13dB to +60dB

•

THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)

•

Noise EIN: 128dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)

•

LIQUID TECHNOLOGYTM Mic-amp emulation*

•

Input Impedance: variable, set in software by pre-amp emulation chosen

•

Harmonics Distortion Range: 0 to 15 where maximum (15) = 10% of 2nd-, 20% of 3rd- and 10% of 5th-order at 0dBFS (level-

•

dependant distortion)

Microphone Inputs 3-8

Frequency Response: 20Hz - 20kHz +/- 0.1 dB

•

Gain Range: +13dB to +60dB

•

THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)

•

Noise: EIN: 128dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)

•

Input Impedance: 2k ohm

•

Line Inputs (Inputs 1-8)

Frequency Response: 20Hz - 20kHz +/- 0.1dB

•

Gain Range: -10dB to +36dB

•

THD+N: < 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)

•

Noise: -90dBu (22Hz/22kHz bandpass filter)

•

Instrument Inputs (Inputs 3 and 4 only)

Frequency Response: 20Hz - 20kHz +/- 0.1dB

•

Gain Range: +13dB to +60dB

•

THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)

•

Noise: -87dBu (20Hz/22kHz bandpass filter)

•

Analogue Audio Outputs (Outputs 1-10)

10 Electronically Balanced Outputs

•

Maximum Output Level (0dBFS): +16dBu

•

THD+N: 0.001% (0dBFS input, 20Hz/22kHz bandpass filter)

•

Summary of Contents for Liquid Saffire 56































Search results

Summary of Contents for Liquid Saffire 56

Reviews:

Related manuals for Liquid Saffire 56

Brands by name

Popular brands

Focusrite Liquid Saffire 56, User Manual

Search results

Summary of Contents for Liquid Saffire 56

Reviews:

Related manuals for Liquid Saffire 56

Brands by name

Popular brands