23
Monitor Presets
Preset Name
Output
Off
- no Monitor control buttons enabled, therefore no sound will come out of any analogue output.
Mono
- outputs only to the Centre / mono speaker (Line output 3.) All other channels are muted.
Output - 3
Stereo
- outputs to Stereo speakers (Monitor 1 and 2 output.) All other channels are muted.
Outputs - 1,2
Quad
- outputs to Monitor 1 and 2 outputs and Line 5 and 6 outputs. All other channels are muted.
Outputs - 1,2,7,8
2.1 Surround
- outputs to Stereo speakers (Monitor 1 and 2 output) and Sub (Line output 4).
Outputs - 1,2,4
5.1 Surround
- outputs to all 5.1 speakers. All other channels are muted.
Outputs - 1,2,3,4,7,8
7.1 Surround
- outputs to all 7.1 speakers. All other channels are muted.
Outputs - 1,2,3,4,5,6,7,8
Mid + Phones 1
- outputs to Mid Speakers and Headphones 1.
Outputs - 7,8
Mini + Phones 2
- outputs to Mini Speakers and Headphones 2.
Outputs - 9,10
Monitor Section Controls
The Monitor section will affect those channels that have been selected for monitor control (indicated with a blue button, see above.)
Monitor level control knob
Set the output level of all assigned outputs using this knob. The output level can be adjusted using the mouse, or from the front
panel control, depending on the status of the H/W Control button. The dB display below shows the current level to which the monitor
knob is set.
Hardware control button
When lit, the monitor knob on the front panel takes control of the monitor level control knob. Mouse control of the monitor knob is
disabled when active.
Note that if the hardware control is switched in and out, and the hardware control position does not match the software position,
then the volume knob works in pick-up mode. A volume change will only occur when the position of the hardware knob matches or
passes through the position of the software level. This will ensure that there are no sudden unwanted volume increases when the
knob is moved.
