
ON/OFF:
1.
Press ”on/off” to start up, and then press ”on/off” to shut down.
WIND:
1.
Press the swing wind button to start the swing wind function; Press the swing button again, and the left and right swing function will be
cancelled.
TEMP-:
1.
Under cooling and heating function, set in the range of 17 - 30°C in cooling mode and 15 - 25 °C in heating mode. Every click on the
temperature, set temperature reduced by 1 °C.
TEMP+:
1.
Under cooling and heating function, set in the range of 17 - 30°C in cooling mode and 15 - 25 °C in heating mode. Each press keys on
temperature, set temperature increase 1 °C.
MODE:
1.
Press the mode key to perform mode conversion and select one of the operation modes of ”refrigeration, dehumidification, air supply,
heating , and automation”.
1.1. Cooling operation: Press the mode key until the refrigeration indicator is on, and select the refrigeration function. While the
refrigeration function is in progress, extend the bar Put the tube out of the window so that hot air can escape from the room. According to
the temperature rise or lower key can adjust the set temperature, the temperature range of 17-30 °C / 63 ~ 86 °F. Press the wind speed
button to select one of the high, medium and low wind speeds.
Note:
In order to improve the cooling capacity of the machine, please note
the following: A) if the room is in direct sunlight, please close the curtains. B) do not place the machine where there is a heat source.
Depending on the rate of in which room is heating up and its size it might be not possible to cool it down to selected temperature.
1.2. Dehumidifying operation: Close the doors and Windows when using the machine to prevent excess moisture from entering the
room. Press the mode key, the dehumidification indicator will light up, and the display screen will display dH, and select the
dehumidification function. In this mode, the wind speed is not adjustable, the default low speed. In the case of selecting dehumidification
mode, expansion tube is not required.
1.3. Fan operation: Press the mode key, the display will display FA, and select the function of air supply. Press the wind speed button to
select one of the high, medium and low wind speeds.
1.4. Heating operation: Keep pressing the mode key until the heating light is on. Press the ”+” or ”-” key to choose their own need to
temperature, temperature range of 15-25 °C / 59 ~ 77 °F.
Note:
Depending on the rate of in which room is cooling down and its size it
might be not possible to heat it up to selected temperature.
Temperature display conversion:
1.
Press both the temperature - and + keys, and the display will switch between Fahrenheit and Celsius.
TRYB CIĄGŁEGO OPRÓŻNIANIA ZBIORNIKA / CONTINUOUS DRAINAGE
1.
W trybie osuszacza należy wyjąc gumowy korek z otworu (A). Następnie zamontować wąż spustowy do otworu spustowego. Z tego
trybu można również korzystać w trakcie używania innych funkcji klimatyzatora.
1.
In dehydration mode pull out the rubber water plug inside
(A)
. Next nstall the drain pipe on the drain changer. This mode can be also used
in other air conditioner working modes.
9