Focus ProHD DR-HD100, User Manual

Page: 87 / 124

DR-HD100 Functions
ProHD DR-HD100 Portable DTE Recorder 71
• EXT CTL FILE
Creates a new file during a record session without losing
frames.
TIME CODE EXT, REC RUN, FREE RUN, REGEN
The DR-HD100 2.0 upgrade provides the additional functions
TC
REC RUN
,
TC FREE RUN
, and
TC REGEN
in
HD RECORDER
mode.
This functionality is only active when the
HD FORMAT
is set to
QUICKTIME
. In
M2T
mode, all TC modes act as
TC EXT
.
The following are timecode (
TC
) functions.
• TC EXT
Group Default
Records the incoming source timecode. If the timecode is not
running, the DR-HD100 records the same timecode number
in each recorded frame. Choose
TC EXT
mode to clear any
stored number.
• TC REC RUN
DV mode or 2.0 upgrade only
In this mode, after a power cycle, the DR-HD100 starts its TC
record count using the
TC SET
value. Later recordings add to the
last value recorded. A power cycle resets the TC record value to the
TC SET
value.
• TC FREE RUN
DV mode or 2.0 upgrade only
This function causes the DR-HD100 to begin counting from
the value stored by
TC SET
.
• A number entered through TC SET is not stored and available
to the DR-HD100 until exiting
TC SET
. Only then does the
DR-HD100 begin counting using that number.
• TC REGEN
DV mode or 2.0 upgrade only
When the DR-HD100 powers up in
TC REGEN
mode, it:
• Reads the timecode of the last track recorded.
• Adds 1 to the number.
• Stores the new timecode as the number that will be assigned to
the first frame of the next recording session.
If the drive is empty, i.e. no existing recordings, the
DR-HD100 uses the
TC SET
value.
TC SET and UB SET Can Be Set at the Same Time
Both parameters, TC SET and UB SET, may be set and are not mutually
exclusive as in some groups, i.e. LCDLIGHT.