Focus ProHD DR-HD100 User Manual Download Page 37

Page: 37 / 124

Quickstart

ProHD DR-HD100 Portable DTE Recorder

Installing / Removing the Battery Pack

Installing a Battery

Step 1:

Place the unit, so that the battery compartment is up.

Step 2:

Position the battery pack, as shown above, so that the latch
hook is almost in the latch slot, and touching the floor of the
battery compartment.

Step 3:

Slide the battery forward while gently pressing down.

Feel the battery slide along guides and seat itself.

Step 4:

When seated, the battery latch clicks into place.

Removing a Battery

Step 1:

Slide the battery latch to the left and hold.

Step 2:

Apply backward pressure to the battery pack at the triangle/
arrow and gently slide the pack back about 1cm or 3/8 in.

This is the reverse motion of inserting the battery.

Step 3:

Remove the battery pack.

Battery
Latch Hook

Gently press

DOWN

while sliding battery pack

FORWARD

Battery Pack Guides

Latch Slot

Latch

Summary of Contents for ProHD DR-HD100





























































































































Search results

Summary of Contents for ProHD DR-HD100

Reviews:

Brands by name

Popular brands

Focus ProHD DR-HD100, User Manual

Search results

Summary of Contents for ProHD DR-HD100

Reviews:

Brands by name

Popular brands