manualshive.com logo in svg

Focus ProHD DR-HD100, User Manual

Share
Download
Focus ProHD DR-HD100 User Manual Download Page 36

Quickstart

20

ProHD DR-HD100 Portable DTE Recorder

Powering the DR-HD100

•

The DR-HD100 operation without a battery installed.

To operate the DR-HD100 without a battery installed, 
connect the unit to an AC power source.

•

Before operating the DR-HD100 with battery power. 

It is first necessary to fully charge the battery. An uncharged 
battery, typically takes 2-3 hours to charge.

Connecting the DR-HD100 to AC Power 

Attach the AC power cord to the DR-HD100 (with or without battery 
installed). The DR-HD100 is immediately ready for operation. 

To do this, connect the AC power as follows:

Step 1:

Plug the cord from the power supply into the bottom of the 
DR-HD100.

Step 2:

Connect the line cord to the rectangular power supply.

Step 3:

Plug the line cord into an electric outlet.

Battery Pack

DC Power Port

DC Cable

Summary of Contents for ProHD DR-HD100





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands