Focus ProHD DR-HD100, User Manual

Page: 114 / 124

DR-HD100 Functions
98 ProHD DR-HD100 Portable DTE Recorder
• Use the
Keeper
key to cycle through the available Reels.
For example, if the current Reel selection is 3. pressing Keeper
changes the selection to Reel 4.
To purchase the wired remote control, p/n
ACSS-0019-01
, for
the DR-HD100, visit Focus Enhancements web site at
www.focusinfo.com.
• JVC GY-HD
The JVC GY-HD control setting is the preferred mode when
using the companion GY-HD camcorder. See page 32 for
more information about using the JVC GY-HD control mode.
• Syncro Slave
Use this mode when the camcorder does not have DR-HD100
compatible external control or the tapeless trigger
functionality. In
Syncro Slave
control mode, the
DR-HD100 mimics the camcorder’s operations by
monitoring the camcorder’s tape record state.
• AV/C
Use AV/C in playback mode and other situations where the
DR-HD100 is controlled by an external FireWire device such
as a NLE system that is not supported by Direct To Edit
Technology. In these cases, the DR-HD100 can be used in a
manner similar to a camcorder to capture footage to the NLE.
In AV/C control mode the TC value reported to the controller
or NLE is the value displayed on the Main menu. Pressing the
DISP
changes the source of the TC. The
DISP TC
mode selects
the TC embedded in the DV/MPEG-2 stream. When in
HD
RECORDER
mode, and the
QUICKTIME HD FORMAT
is
selected, the type of timecode reported is defined by the
HDV
TC TYPE
setting, see page 75.
Do Not Use AV/C control in Record Mode