3
DO NOT
-
site in a position where curtains or drapes could cover the appliance.
-
use the heater to dry clothes.
-
site in a position where other soft materials could cover e.g. below a coat rack.
-
site/use in an outdoor location(s).
-
site behind an opening door where mechanical impact/damage could occur.
-
run the supply cable under carpets
.
- site where the supply cable would become a trip hazard.
-
mount on a wall.
-
sit, stand or forcefully pull on the appliance.
-
obstruct, cover or force items into
the openings.
•
DO NOT
run the mains cable under carpets, rugs etc.
•
DO NOT
cover or obstruct the heater in any way. Overheating will result if it is acci-
dentally covered.
• Never immerse the product in water or any other liquids.
•
DO NOT
use the appliance outdoors.
• Before cleaning the appliance, ensure it is unplugged from the power and that it is com-
pletely cool.
•
DO NOT
clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It
could cause danger to the user or damage to the appliance.
•
DO NOT
insert or allow foreign objects to enter the inlet or outlet vents as this may
result in electric shock, fire or damage to the appliance.
•
DO NOT
install the fire using an extension cord.
• Unplug from the mains supply if the appliance is not to be used for long periods.
• This product is only suitable for well insulated spaces or occasional use.
timer, or connected to a circuit that is regularly switched on and off by the utility.
• Keep furniture, curtains and other fabric material away from the appliance.
•
DO NOT
leave the appliance unattended during use.
• From time to time, check the cord for damage. Never use the appliance if the cord or any
part of the appliance shows signs of damage.
1.0 PRELIMINARY NOTES - CONTINUED
GB IE
3.0 APPLIANCE DATA
Weight (kg):
11 kg
Voltage (Volts):
220-240V a.c. 50Hz
Rated Power
2000W
Supply Plug:
BS 1363, 13A Fused
Supply Cord:
1.7 Metres
Location:
Indoor Use
LED Display:
12 Watts
The appliance is supplied with a pre-wired three pin plug (13 Amp fuse rated) and 1.7 metres of electrical cable. It is therefore necessary for a
suitable electrical socket to be located within this distance and be easily accessible. The appliance is suitable for installation into all proprietary
surrounds with an opening of 440-445mm by 600-605mm. The appliance can be fully recessed into the opening depth of 205mm or greater. It
may be installed directly into any proprietary surround which can house this size of rebate, without the need to recess the appliance into a wall
opening or fabricate a false chimney breast.
The firebox can be installed onto a suitable combustible surface/ shelf covering the entire base area of the box.
This appliance should be positioned on a firm level surface/ shelf and in a clean ‘dust free’ environment. If the fire is to be sited in a fire sur-
round then the suitability of the surround for use with electrical heaters should be established with the fire surround manufacturer.
If fitted into an open draught fireplace, it is recommended to blank off the chimney to reduce the risk of draught through the fire, which may
cause the safety cut out system in the fan heater to operate.
It should be noted that the appliance creates warm convected air currents. These currents move heat from the room surroundings to, and up
the wall surfaces adjacent to the heater.
Installing the heater next to these types of wall coverings or operating the heater where impurities in the air, (such as tobacco smoke) exist,
may slightly discolour wall finishing.
If the appliance is to be mounted on a dry lined or timber framed construction then the integrity and ability of the wall to carry the weight of
the appliance must be confirmed. It is important in these circumstances that any vapour barrier and/or structural members of the house frame
are not damaged.
If you are unsure of the ability of the wall to carry the weight and/or which type of wall fixing to use, you should take professional advice and
obtain the correct fixings. Alternatively, find a more suitable wall location.
2.0 INSTALLATION REQUIREMENTS
©
20
2
1 Focal Point Fires
Ltd
.