8.0 INSTALLATION WALL MOUNTED - CONTINUED
GB IE
6
©
2019 Focal Point Fires plc.
Installing the fixing screws into the wall.
1. Insert three of the fixing screws into the top three wall plugs.
Installing the metal fixing plates to the back of the fire.
1. Carefully place the fire on it’s front.
2. Align the metal fixing plates (A) with the screw holes located
at the back of the fire box.
3. Use two of the metal plate screws to fix each of the metal
fixing plates to the firebox.
4. Ensure the metal fixing plates are securely attached.
Installing the wall plugs into the wall.
1. Drill 5 holes (8mm diameter, 40mm deep) into wall.
2. Insert the supplied wall plugs into the drilled holes.
3. Please refer to the diagram for hole locations.
Please note: Before drilling into walls, always check that
there are no hidden wires, pipes, etc.Make sure that
screws and wall plugs supplied are suitable for
supporting the unit in your surface. Consult a qualified
person if you are not sure.
