background image

9.0 OPERATING THE APPLIANCE - CONTINUED

10

©

2019 Focal Point Fires plc.

2. Set the week timer:

1) Press

on the remote control. Press

or

button to set the day time. Press

to set the time to 30 (min)

-1H-2H-3H ---- 8H-00; press the

to set the time to 8H-7H-6H---- 30 minutes.

While making any settings relevant to timer setting, the screen will also display the timing icon

. When the timer setting has

only 99 seconds left, the digital tube will show the seconds left.

2) Press 

for 5 seconds to set the weekly timer.

Press

for 5 seconds, and the display panel will show ON and MON , while the digital display showing'…',

Weekly timer set, start from Monday, for example setting Monday: (Monday on status-Monday off status-Thursday on

status-…..Sunday off status.)

1) Press

the first time, through the '

' button to set the start working time on Monday, while the display board

shows ON and MON will flash at the same time. First, set the hour, the first two digital of the tube showing hours, you can
press

button to set the hour.

2) Press

the second time to set minutes. Ten minutes is consider to be a unit and you could press button

to adjust

minutes (from 10,20-50-00 minutes).

3) Press

for the third time, to set the power off-working time on Monday. The ON icon will be disappear and at the same

time the OFF icon will flash on (the MON icon will not disappear). First, set hours by pressing plus and minus button. The first

two digit will display hours.

4) Press

a fourth time to set the minutes, you can adjust the minutes by pressing plus and minus button.

You will finish setting the Monday timer setting after four time setting operation. Press

again to change the setting on-off

situation on Tuesday. The operation method is same as Monday.  When you finish to set the whole week, the digital tube will

show the ambient temperature. This indicate the setting have been finished.

3. If you do not want to set the on-off timer on a certain day of the week, you need to press the timer key

continuously for four times to skip this day.
For example, you do not need to set on-off status on Tuesday. When the Monday timer setting is finished, press the timer

setting key, then you could set Tuesday. ON and MON will disappear. Instead, ON and TUE will lit up. At the same time the

first two digital of the tube display: : .’ . You should not press plus and minus button to set time. You should press the timer again

, and the digital tube will display‘: . : . : . :’( minutes). At this time, do not press the plus and minus button, press the timer third

time, the ON icon on the display board will disappear while OFF icon lit up. TUE icon will appear and the first two digit of

the tube display ‘: : .’(hour setting). Do not press plus and minus button at this time. Press the timer the fourth time, the digit

tube will display ‘: . : . : . :’(minutes). Press again the timer button. By this way, it will not set on that day and the display board

and the digit tube will transfer to Wednesday set.
4. The same day timing and weekly timing conflict, according to the principle of first switch to the first set, all

settings need memory function
5

.

Child lock

The child safety lock is adjustable from remote control only.

Holding the child safety lock button for 5 seconds disables or enables all functions on the control panel and remote control.
6

.

Temperature control energy-saving features: (additional hidden features)

1 When the difference between acutal detected temperature  and set temperature are within 3°C (for example, set 18°C and

detected 16°C -18°C), heating power 750w.

2 When the difference between acutal detected temperature  and set temperature exceeds 3°C (for example, set 18°C,

detected as 15°C or below), heating power 1500w.

3 when the actual detected temperature is 1°C higher than the set temperature, the heating will be off (for example, set to

27°C, the actual test is 28°C), the fan will stop working after 10 seconds.

4 Press the power off button on the control panel, the temperature control function will record the last setting when power

on again.

GB IE

Summary of Contents for EBONY ELECTRIC














Reviews: