24
25
Appendix 1 Technical specifications
Specifications Dowing
2
Mass
• Mass Dowing
2
(body)
0.680
[kg]
Dimensions (in default position)
• Height
341
[mm]
• Width
72
[mm]
• Depth
241
[mm]
Rotation tilt function
• Angle
-20...20
[º]
Range of motion
• Up/Down
415
[mm] @ end of lever
• Forward backward stroke
420
[mm] @ end of loadarm
• Horizontal rotation
unlimited
[º]
Balance mass
• Up/Down
•
Mass
.25...4.5
[kg] @ end of loadarm
•
Mechanic adjustable
0...100
[%]
Mounting position
• Maximum allowed mounting angle
-20...20
(º)
Storage conditions
• Temperature
-40...85
[ºC]
• Humidity
35...85
[%] non condensing
Operation conditions
• Temperature
-10...+50
[ºC]
• Humidity
35
...
85
[%] non condensing
Degree of protection
• IP-class
IP
40
(IEC
60529
)
Safety features
• IFDS
Maintenance instructions
Maintenance hardware
Do not place the device in direct sunlight or in the direct vicinity of a heat source, otherwise
this might result in discolouration or scorching of plastic parts. Direct sunlight may reduce the
lifetime of system parts and interfere with operation.
All housings must be regularly inspected. If any housing is visibly damaged, do not use the
device. It is prohibited to physical modify Dowing
2
. There are no serviceable parts inside
Dowing
2
. Contact Focal Meditech for any maintenance issues.
In case Dowing
2
is not mounted on the mounting base it should always be stored in the case to
prevent falling or other impacts that can damage the system.
Cleaning
Maintenance of Dowing
2
is limited. Dowing
2
can be cleaned using a moist cloth and a non-
aggressive cleaning agent.
Reuse
To reuse Dowing
2
, it must be disassembled and reviewed by Focal Meditech or an authorized
professional that is approved by Focal Meditech. Dowing
2
must intensively be cleaned and
inspected. The plastic parts of the buttons can be removed and replaced by new button parts.
The arm fitting, elbow fitting and wrist support have to be replaced.
Focal Meditech will refurbish and repackage the reused Dowing
2
in such a way that it will meet
the safety and performance requirements according to applicable regulations.
Decommissioning
