FNM alpha SM 230, User Manual, Page: 43 / 72

42 43
Putting into operation
Setting the WLAN interface
The base module alpha WSN BM 130 provides the opportunity to make the received
data available over a WLAN. The PC, on which the data shall be displayed, has to be
equipped with WLAN or with a LAN port for the connection of a WLAN access point
as well as with an Internet browser.
A HTML page is available for all manual configurations. In order to be able to make
changes, start a browser (e. g. Internet Explorer) and enter the IP address of the LAN
module into the address line. In case you do not know the IP address, have a look at
the chapter "Searching for modules by means of Discovery-Tool".
Fig.: Configuration page WLAN module
Automatic setting of the IP address
The WLAN module of the base module alpha WSN BM 130 is set to DHCP by default.
So the IP address will automatically be assigned in case a DHCP server exists.