FNM alpha SM 230, User Manual, Page: 36 / 72

36 37
Putting into operation
Link test USB-Port
Open a terminal programme (e. g. Hyperterminal from Microsoft Windows) and install
it according to chapter "Settings at the RS232 interface" or "Settings at the terminal
programme".
Open the COM-Port you have just installed and send a <CR> (Carriage Return) to the
base module. If everything is set correctly, you should see a message of type 0x72 of
the base module in the terminal window. Also see chapter "Protocol description". If this
is not the case, it will not be possible to communicate correctly with the base module.
Please have a look at the chapter "Troubleshooting" for this topic.
Setting the LAN interface
In case your PC is equipped with a LAN interface, you can use this connection for
the connection with the base module alpha WSN BM 110. For this, you have to have
administrator rights or you have to login to the system as system administrator. Install the
supplied LAN driver as described following.
Installation of the LAN driver
1. Connect the base module alpha WSN BM 110 with the PC per network or di-
rectly over a Twisted Pair LAN cable. Execute the file "Setup.EXE" in the directory
"/LAN_Treiber_Win2000_XP" of the supplied CD.
Fig.: Start of the installation dialogue