FNM alpha SM 230, User Manual, Page: 35 / 72

34 35
Putting into operation
Checking the USB driver settings
To check the correct installation of the USB driver, please proceed as follows and
open:
1. Start
à
Einstellungen
à
Systemsteuerung
à
System
à
Hardware
à
Gerätemanager
2. Click on the "+" in front of "Anschlüsse (COM und LPT)" (Connections (COM and
LPT))
Fig.: Device manager
3. Twice click on the entry: "CP2101 USB to UART Bridge Controller (COMx)".
A new COM-Port (COMx) should be entered here now. The "x" stands for the respective
COM-Port that has to be set, e. g. COM2.
4. Then select the button "Anschlusseinstellungen".
5. Check the following settings:
bits per second: 115200
data bits: 8
parity: none
stop bits: 1
flow control: none
6. Close the window and terminate the device manager.
If all installations are correct, a new COM-Port for the communication with the base
module is available now.