FNM alpha SM 230, User Manual, Page: 40 / 72

40 41
Putting into operation
3. Twice click on the entry "Digi Connect ME Port y (COMx)".
A new COM-Port (COMx) should be entered here now. The "x" stands for the respective
COM-Port that has to be set, e. g. COM4. The "y" stands for the appropriate LAN-Port,
since several base modules in the LAN can also be administrated from one PC.
4. Then select the button "Anschlusseinstellungen".
5. Check the following settings:
bits per second: 115200
data bits: 8
parity: none
stop bits: 1
flow control: none
6. Close the window and terminate the device manager.
If all settings are correct, a new COM-Port for the communication with the base module
will now be available.
Configuration of the LAN interface
The base module alpha WSN BM 110 provides the opportunity to make the received
data available over a LAN. The PC on which the data shall be displayed has to be
equipped with a LAN connection as well as with an Internet browser for this.
A HTML page is available for all manual configurations. In order to be able to make
changes, start a browser (e. g. Internet Explorer) and enter the IP address of the LAN
module into the address line. In case you do not know the IP address, have a look at
the chapter "Searching for modules by means of Discovery-Tool".
Fig.: Configuration page LAN module