Fnirsi SG-003A, Operating Manual

Page: 7 / 20

7
6
5 【Main Interface】 : Main display interface
【 RCVK 】 Up function key: When the key is white, it is to add value or select upward
(when the output pulse is quantitative and the cursor is not in, it is the same as the
programming mode).When the 【 FN 】 red light is on (the button is green), click
【 RCVK 】 to enter/exit the preset output mode. At this time, the up, down, left
and right buttons can quickly recall the preset signal value
【 AUTO 】 Left function key: when the key is white, it is to select to the left (when
the output pulse is quantitative and the cursor is not present, it is the same as
the programming mode).When the 【 FN 】 red light, click 【 AUTO 】 to enter/exit
the programming mode (the button blue light), at this time, the up key-single
output, the down key-reset, the left key-end the output, the right key-pause/
continue
【 ON/OFF 】 Confirmation button: when the main interface (Turn on/off the
output); when setting the interface(Click for "OK")
【 CURVE 】 Right function key: When the key is white light (select to the right ~
when the output pulse is quantitative and the cursor is not in, it is the same as
the programming mode).When 【 FN 】 is red light (click to switch curve
interface/character interface)
【 CONVRET 】 Down function key: When the key is white, it is to decrement the value
or select down (when the output pulse is quantitative and the cursor is not in, it is the
same as the programming mode; When 【 FN 】 is red light (click to enter/exit the
conversion mode)
8
9
10
【 Panel Display 】
1
2
7
10
6
9
8
5
3
【 3-key area 】
【 3-key area 】
4
��
PAGE