27
3.Use the tester to trigger fast charge, it cannot be charged, nor
can it be charged without the tester
Answer: Many people use the tester to trigger the quick charge to charge
the mobile phone. This is not recommended. It is easy to break the phone
without knowing the performance of the phone. Moreover, if the mobile
phone supports fast charging, the mobile phone itself will trigger fast
charging, and there is no need for additional triggering by the tester.
For the function of charging the mobile phone, FNB38 has a function called
PD protocol conversion, which can convert the QC protocol to the PD
protocol to charge the PD device. Once again, do not directly trigger
the charging of the mobile phone, it is unsafe! ! ! Tester triggering
is generally used to charge other devices, such as 12V routers.
4. Why does the PD protocol trigger, when selecting the voltage,
it restarts before it is selected?
Answer: If the electric equipment can trigger the fast charge, there is
no need for additional triggering by the tester, otherwise it will
interfere.
5. Why does it keep restarting after entering the PD E-Marker
tester?
Answer: Because the tester is in E-Marker mode, the tester does not have
Summary of Contents for FNB38
Page 1: ...1 FNB38 manual V1 2...
