7
Run:XXX:XX:XX
Represents the tester's startup time, without saving, restarts the timer after
restart.
Rec:XXX:XX:XX
It indicates the valid time of the tester's recording capacity / power
consumption. It is saved offline and will not be lost after power failure.
Time
It shows the voltage and current offline curve recording time. This time can be set by
Cap / Ele Limit, and
Rec:XXX:XX:XX
Record validity time for association or disassociation:
When Cap / Ele Limit is ON, the effective time of recording is limited by the time of offline curve recording.
For example, Time is set to 1h. After recording for 1h, offline curve recording is completed, and the capacity /
power consumption is no longer recorded. It is OFF. After the offline curve recording is completed, the capacity /
power consumption continues to be recorded. Cap / Ele Limit is OFF by default and can be set by the user.
Thres
Indicates the recording current threshold.When the Auto Rec Switch is ON, Auto is
displayed. This value is meaningful, that is, when the current is greater than Thres, the capacity /
power consumption / offline curve is automatically recorded; if the current is less than Thres, no
recording is made.
When Auto Rec Switch is OFF, Manual is displayed, and the Thres value is meaningless.
Recording on / off is determined by the OK key. After recording is turned on, all records are
recorded regardless of the current.
Memor
Indicates the remaining recording capacity of the offline curve. When it is 0%, the
recording is completed.
Grp:1/5
Indicates the record group.
ON
/
OFF
Indicates the current recording status on / off.
Instructions
(1) << key
Short press: page turning;
(2) Long press: switch to capacity / power consumption list (see Figure 4) (see the following
description).
(3) >> key
Short press: page turning;
(4) Long press: switch record group.
Summary of Contents for FNB38
Page 1: ...1 FNB38 manual V1 2...
