15
the voltage will return to 5V)
(2) OK key
Long press: Exit the current page. (Still triggering).
7.7 PD protocol trigger (requires connection to Type-C interface)
Select PD trigger, short press OK to enter the PD protocol trigger page (as shown
in Figure 17). When entering, it will detect whether PD detects the CC pull-up. If
not, return to the selection page. If there is a CC pull-up but no Caps are received,
the voltage option will not be displayed.
Figure 17
PD2.0 Instructions
(1) << >>key
Short press: Select PD trigger voltage.
(2) OK key
Long press: Exit the current page.
PD3.0 Instructions
(1) << >>key
Short press: Select trigger voltage. When the PPS is triggered, the voltage is lowered / raised.
OK button
(2) OK key
Short press: When the PPS trigger is selected, the step voltage unit is changed.
Long press: Exit the current page.
Note: PPS trigger requires continuous communication to maintain, so the charger will restart for a
period of time after exiting the interface.
Summary of Contents for FNB38
Page 1: ...1 FNB38 manual V1 2...
