28
CC pull-down, so the PD charger will not supply power. After the power
is not supplied, the physical chip of the PD is pulled down by default,
and it is powered again, and it does not supply power after it is turned
on. . Therefore, connecting the PD charger to the TYPE-C interface for
power supply will cause the tester to restart. Please use the USB port
and the micro interface for power supply.
6. Why is the capacity displayed on the tester different from the
battery capacity?
Answer: To measure the capacity of the battery, you need a formula to
convert it out:
formula:
1. = mAh x output voltage/ battery voltage * efficiency
2. = mWh/ battery voltage* efficiency
(The battery voltage is generally 3.7V, and the efficiency is about
85-90%)
7.The tester automatically restarts when the fast charging
protocol is automatically detected
Answer: Some charging heads will restart when switching trigger protocol,
please connect HID power supply.
Summary of Contents for FNB38
Page 1: ...1 FNB38 manual V1 2...
