Fnirsi DSO-TC2, Manual

Page: 7 / 20

【4.1】 Button Function
Turn-on voltage
<5V, gate trigger
current <6mA
*
*
25pF～100mF
0.01Ω～50MΩ
10uH～1000uH
0.1～4.5V
0～16V
1.5kHz～9.99MHz
NEC protocol
infrared code
Gate voltage
Capacitance value, loss factor Vloss ⑤
resistance
Inductance value, DC resistance
⑥
Voltage value, positive and negative polarity
Voltage value
Temperature
Humidity
*
Display user code and data code, and display the
corresponding infrared waveform
SCRS
Triac
Capacitance
Resistance
Inductance
Battery
Input voltage
DS18B20
DHT1
PWM output
Infrared remote
control decoding
Note ① : Ices, Iceo, Uf are displayed only when valid
Note ② : Junction capacitance and reverse leakage current are displayed only when valid
Note ③ : The turn-on or turn-off voltage of the FET must be less than 5V
Note ④ : Displayed only when there is a protection diode
Note ⑤ : Vloss is only displayed when valid
Note ⑥ : Two-pin component and inductance measurement when the resistance is less than 2.1kΩ
TFT display
Ocking IC seat
Power
Type-C
Charging Interface
Locking lever
Enter menu/
Automatic adjustment
Indicator light
Infrared test
receiving window
Move up
Start/Pause test
Move down
Confirm selection
Integrated foldable stand
�、BUTTON & INTERFACE
��
PAGE