Fnirsi DSO-TC2, Manual

Page: 14 / 20

�、EXTENDED TESTING CAPABILITIES
（1）Continuity Test: Use the test sockets 1 and 2 of the test socket to carry out
continuous resistance test.If the circuit is low resistance, it is judged as
"on" and a buzzer sounds
（2）Voltage Test: The MCX test line needs to be inserted into the top jack
【IN (0~16V)】 to test the voltage between the test lines
【 Function Display 】
After pressing the 【MENU】 button to enter the setting menu.Press 【TEST】
button again to enter the function page.Extended test items and calibration
function items are provided here
��
PAGE
（1）Boot LOGO Off/On
（2）System language English/Chinese
（3）No operation for 1 minute:
Auto Off / None
（4）Adjust system volume.
（5）Adjust screen backlight brightness
【 Set Display 】
The items that can be set are as follows:
【6.5】 System Settings
Press 【MENU】 button in TC2 component tester mode.It will enter the setting
menu page, press the direction 【Up】 and 【Down】 buttons to select the
tem.Press【OK】 to adjust parameters or switch states